The tests tab displays the test information for this component.
Property
Description
Name
The name you would like to give the test.
By default it is given the component name. Each time you change the component name, the test name will change as well.
However, once you change the test name to something different to the component name. It will not be updated if you change the component name.
Type
The type of test that would be performed at the output of this component. (See the related section for more information on test types)
Time
The time required to perform this test (See the related section for more information on tests and optimization)
Cost
The cost required to perform this test (See the related section for more information on tests and optimization)
Location
Use the location manager to set up optional physical locations for large distributed systems, and select the location here.
A location is used to identify tests that are in a certain location which should be tested together to avoid wasting travelling time.
An example of this would be to perform all tests in one location before moving to tests in the next location because there is a significant traveling or setup time involved between the two locations.
See section on the Location Manager for more information.
